GZPT 1060 series Automatic Triple Rotary High Speed Tablet Press
Machine
Applicant & Summary:
Feeding powder in three hoppers. Tablets compressed at three sides.
Tablets ejected through three sides chute. Rapid speed with large
quantity punches.
Cancel hydraulic system. Compression rollers adopt mechanical
support .To avoid secondary pollution; Due to the upper and lower
Compression rollers adopt independent modules, the rollers
adjustment separately, punches can not be clasped .The position of
lower compression rollers is controlled by motor and fast
adjustment.
Electric control system is entirely separate from main machine. The
operation area is separate from production area. This design can
extend the service life of electric control system. Also greatly
enhance the sanitation and safety factors.
The parts in contact with powder such as feeding system、turret、and
tablets ejection parts use stainless steel or nontoxic polymer
materials. Meets GMP standard.
No hand-wheel control. The filling system use servo motor control
which has fast reaction speed. The main pressure and pre-pressure
use synchronous motor control .The location of main pressure and
pre-pressure measured through the encoder. Accurate data and reduce
manual errors.
Can adjust filling volume to control tablet weight .If over-filling
or less-filling or the punch force over-limit, the machine will
give alarm. At the same time can monitor the force of a single
punch as well as monitor the force curve of punch. Pressure
histogram can be displayed on touch screen. The over-weight and
less-weight tablets can be rejected.
GZPT-1060 series Automatic Triple rotary High Speed Tablet Press
Machine is a kind of large-scale tablet press machine which
developed by our experience according to User’s requirement in the
world. GZPT-1060 series is best used for mass production of single
product .Also used for two-layers tablets and three-layers tablets
as well as sandwich tablets.
The filling system use servo motor control which has fast reaction
speed. Adjustment precision can reach 0.01mm. Filling volume
displayed in the touch screen directly. No need to use their
experience to repeated measurement
Tri-wheeled double deck feeding system
The upper impeller can increase the powder flow and balance powder
density;
The lower 2 impellers are used for feeding and dosing .To ensure
the uniformity of feeding;
Use Servo motor to adjust dosing cam track Which can control the
filling depth. To ensure an accurate dosing.
Separate control cabinet to operate the machine; separated
production area from operating area; ensures the safety for
operator and sanitation for production;
Adopts 10 inches touch screen to fulfill the automatic controlling,
without hand-wheels;
Adopts B&R PCC control system with quick and accurate response;
All information about manufacturing can be displayed, stored,
extracted and reset;
Different degree of user’s password can be set.
Main pressure system、pre-pressure system、filling system、feeding
system adopt modular design. Simple structure .These modular parts
can be freely adjusted or removed. Noninterference between each.
Maintenance easy. The main pressure and pre-pressure are the same
structure which can be interchanged each other .Both main pressure
and pre-pressure are all 100KN which make it easier for forming
tablets.
Technical parameters:
Model | GZPT-122 | GZPT-113 | GZPT-95 | GZPT-76 |
No. of stations | 122 | 113 | 95 | 76 |
Tooling type | BBS | BB | B | D |
R.P.M | 5.1-51 |
Max output(tablets/h) | 1119000 | 1037000 | 872000 | 697000 |
Main motor power | 18.5kw |
Main pressure | 100KN |
Pre-pressure | 100KN |
Max tablet diameter | 11mm | 13 mm | 16 mm | 25 mm |
Max length of irregular tablet | 13mm | 16mm | |
